Inert
Inert

Copyright 1981 – 2024, Inert.
The Inert logo is a registered trademark of Inert Corporation.

I-Lab 2GB

Glovebox System

Overview

The I-Lab line of Glovebox and Gas Management Systems are designed as an economical solution for inert research applications.

The I-Lab Gas Management Systems provide a < 1ppm O2 and H2O inert atmosphere required for a multitude of air-sensitive applications.

Download Data Sheet

View Options

I-LAB Specifications

 

2-Glove Workstation

Hide Specifications

Internal dimensions 1213 mm Wide x 764 mm Deep x 897 mm High
External dimensions 2005 mm Wide x 1034 mm Deep x 2024 mm High
Internal finish Type 304 stainless steel, #4
External surfaces RAL 9011 (Graphite Black)
Wall thickness 0.105″ (2.6 mm)
Feedthrough 4 x DN 40 ISO-KF blank
Internal power 1 x electrical feedthrough
Internal power 1 x fuse protected 6-outlet power strip
Shelving 2 x Height adjustable 304 stainless steel #4 finish. 30.6″ (778 mm) Wide x 9.7″ (247 mm) Deep
Plumbing 304 stainless steel tubing
Filters 1 x inlet/1 x outlet HEPA (99.99% vs 0.3 micron MPPS)
Lighting External LED light
Power 100-120 or 200-240 VAC 50/60 Hz 20 Amp

Non-Modular Box Design

View Specifications

Stand with casters and leveling feet Leveling feet adjustability

Large Antechamber, 15″ (381 mm) Internal Diameter x 24″ (609 mm) Internal Length

View Specifications

Bolt On left or right side
Internal finish 304 stainless steel #4 surface finish
External finish RAL 9011 (Graphite Black)
Internal tray 304 stainless steel #4 surface finish
Tray size 11.25″ (285 mm) Wide x 22.5″ (571 mm) Long
Internal/external travel 13.9″ (353 mm)
Anodized aluminum doors, vertical opening with gas piston
Manual evacuate/refill valves
Analog vacuum gauge 0 to -30″ Hg
Leak rate < 10-5 mbar l/s

Small Antechamber, 6″ (152 mm) Internal Diameter x 17.3″ (441 mm) Internal Length

View Specifications

Internal finish 6061 anodized aluminum
External finish RAL 9011 (Graphite Black)
Internal/external doors 6061 anodized aluminum
Manual evacuate/refill valve
Analog vacuum gauge 0 to -30″ Hg
Leak rate < 10-5 mbar l/s

Polycarbonate (Abrasion Resistant) Window 3/8″ (9.5 mm) Thick

View Specifications

Viewing size 41.8″ (1061 mm) Wide x 30.2″ (767 mm) High

Circular Glove Ports

View Specifications

Black Delrin, 8″ glove port 0.015″ (0.4 mm) thick butyl rubber gloves, hand size 9.75

I-Lab Gas Management System

View Specifications

Single column gas purification system
O2 and H2O purity level
O2 capacity = 43 L
H2O capacity = 1800 g
Automated purifier column valves Interlocked with the blower. Blower will not run if the valves fail to open
Variable speed circulation blower 120 cfm max flow rate blower
Max flow rate through purifier column 101m3/h (60 CFM) 60 cfm

PLC Control System

View Specifications

Color touch screen

Automatic Pressure Control

View Specifications

Automatic pressure control (+/- 15 mbar)
Manual pressure control Footswitch

Fully Automatic Regeneration Sequence

View Specifications

Manual purge valve

Vacuum Pump

View Specifications

Vacuum pump 10 cfm (17 m3/h) rotary vane pump with oil mist eliminator & oil return kit

Integrated Oxygen Analyzer

View Specifications

Range 0-1000 ppm
Zirconia sensor as standard
Or electrochemical sensor for solvent compatibility

Integrated Moisture Analyzer

View Specifications

Range 0-1000 ppm

Overall System Leak Rate

View Specifications

<0.05vol%/h (ISO 10648-2)

System Gas Requirements

View Specifications

Working gas ³ 99.995% N2 or Ar
Working gas pressure 55 psi (3.8 bar)
Working gas flow rate 250 l/min
Regeneration gas 3-7% H2, balance N2 or Ar
Regeneration gas pressure 5-7 psi (0.3-0.5 bar)
Regeneration gas flow rate 30 l/min